Receivers for wireless Zigbee control of LedStore 230V. If you don't want dimmability, choose a receiver that can switch lights (or device) on and off wirelessly. If you want to dim the lights wirelessly, choose a receiver that allows dimming. The maximum load for both is 250W.
with a 230V receiver you can convert an existing spot or LED panel array into a wireless one, and by purchasing a Zigbee hub and app for your mobile device, your lights become smart lights!
In addition to the receiver, you will need either a wireless VaLO Zigbee series button or a WIFI-RF hub, an app and an Android/iOS device to control the lights. One receiver can be controlled by more than one button (e.g. when you need control of the top and bottom of the stairs) if the lights are paired via the HUB.if pairing is done directly between a receiver/transformer and a Zigbee button, only one button can be connected to one receiver.
The receiver is installed between the transformer and the mains power supply, i.e. control is from the primary side.
