5m LED strip HELMI, 3000K, 24V, 20W/m, IP20, CRI94

5m LED strip light HELMI, 3000K, 24V, 20W/m, IP20, CRI94

This LED strip uses a meledcircuit with a colour rendering index of 94. The LED strip is dimmable and has 1070 lumens of luminous intensity per meter.

The LED strip has 120 LED circuits per metre and 5cm cut-off distance. The ribbon comes in a 5m roll.

We give a 3 year warranty on the ribbon.

Excellent colour rendering

The CRI number indicates how well the LED light reproduces colours as they should be. A high CRI value indicates that the luminaire reproduces a wide range of colours. The closer you get to 100, the more naturally colours are reproduced. This LED strip light has a CRI of up to 94, which ensures excellent colour rendering.

Installation

In addition to the strip, the installation of the LED strip requires a transformer, an aluminium profile and operating switches.

This 24V LED strip comes in a 5m roll and can be cut to size in increments of 5 cm. The strip has clear markings to make cutting easier and the cut points have copper dots for soldering. We recommend soldering the strips together. We are happy to help with any installation questions.

We recommend powering from both ends if the strip is more than 10m in a single piece. This prevents light loss and gives an equally bright light from both ends. The Led strip should always be attached to an aluminium (or other metal) strip to allow excess heat to be conducted away from the LED circuit. This will prolong the life of the led strip, and keep the warranty valid. Aluminium profiles can be ordered from our online shop, where they are available in a variety of different types.

LED strip 24V works well with solar power, boats and cars that use 24VDC, then a separate power supply is not needed. In other cases, please order a suitable 24V power supply for the strip.

Installing plugless transformers is electrical work and requires adequate qualifications. We will be happy to help you with any installation questions.

Dimming

To dim the LED strip, you can use either a traditional rotary wired dimmer or our VaLO RF series wireless dimmer. When using a conventional rotary dimmer, the transformer of the LED strip must be TRIAC dimmable. The strips can also be controlled by DALI systems. Wireless dimming is perfect for applications where there is no wall switch for the luminaire, but the luminaire is powered by a constant current.

In the case of a smart home, a Zigbee transformer and controllers for wireless control are chosen. In Zigbee transformers, the receiver is already built-in.

With the VaLO RF wireless solution, you simply install the receiver between the LED strip and the power supply. You can then control the strip with wireless switches from wherever you want. The wireless switch is powered by batteries, which are easily replaceable. You can also mount the switch on the wall if you wish, but it does not need a separate power supply.